Studio City • Sherman Oaks Service Hub

Dryer Repair in Studio City, CA

Gas and electric dryer repair for all brands — Whirlpool, Samsung, Miele, and Speed Queen commercial-duty units. Jacob's trucks carry heating elements, thermal fuses, belts, drum rollers, gas valve coils, and control boards for most makes. — 5 minutes from our Sherman Oaks office.

★★★★★ 5.0 Google Rating25+ Years ExperienceSame-Day Service AvailableAll Major BrandsUpfront Pricing

Common Dryer Repair Problems in Studio City

Studio City's hillside homes along Laurel Canyon and the condo complexes near Ventura Blvd keep Jacob busy with a steady mix of premium and standard appliance repairs.

Not Heating

Blown thermal fuse, failed heating element (electric), or failed gas valve coil — diagnosed to the exact failed component before any part is ordered.

Drum Won't Tumble

Broken drive belt, worn drum rollers, or a seized idler pulley stopping the drum from rotating.

Takes Multiple Cycles

Clogged vent duct, restricted lint screen, or a failing moisture sensor dramatically extending dry times.

Won't Start

Defective door switch, blown thermal fuse, or a failed start relay preventing the dryer from initiating.

Squealing or Thumping

Worn drum support rollers, damaged felt seal, or a foreign object caught in the drum housing.

Error Codes

Control board faults on Samsung, LG, and smart-enabled Miele units — Jacob reads manufacturer codes without guesswork.

Dryer Repair Cost in Studio City

$130–$380

Thermal fuse and belt replacements typically run $130–$220. Heating element and motor replacements fall in the $220–$380 range. Gas valve and control board repairs vary by brand — Jacob provides the exact quote before starting.

Jacob provides an exact written quote before starting any work — no hidden fees, no surprise charges. The diagnostic service call fee is applied toward the repair if you proceed.

"A dryer that tumbles but produces no heat is almost always a blown thermal fuse or failed heating element. I carry every common part for the top 10 brands. Most heating-element calls are done in under an hour."

— Jacob, Owner · Everyday Appliance Repair · Serving Studio City since 1999

Dryer Repair FAQ — Studio City

How much does dryer repair cost in Studio City?+
Dryer repairs in Studio City typically cost $130–$380. Thermal fuse and belt replacements run $130–$220. Heating element and motor replacements fall in the $220–$380 range. Jacob always provides the price upfront. Call (818) 990-9706.
Can you repair gas dryers in Studio City?+
Yes. Jacob services both gas and electric dryers in Studio City. For gas dryers he checks the gas valve coil set, igniter, and radiant flame sensor — the three components that most commonly fail on gas dryer heating circuits.
My dryer runs but won't heat — what's the fix?+
A dryer that tumbles but produces no heat almost always has a blown thermal fuse, failed heating element (electric), or a faulty gas igniter (gas). Jacob carries all three components and resolves most heating failures in a single visit. Call (818) 990-9706.
Is my dryer worth repairing?+
If the repair costs less than 50% of a new unit and the dryer is under 12 years old, repair is almost always the better choice. High-end brands like Miele and Speed Queen are built to last 20+ years and almost always worth repairing.

Ready to Book Dryer Repair in Studio City?

Same-day service available. Jacob answers the phone — no call centers, no phone trees. Upfront pricing before any work begins.

(818) 990-9706

Mon–Sun · 7am–7pm · Sherman Oaks Service Hub

Text Jacob Call Now